Extrusion & Post
4 조회수
LDPE Thermocouple Calibration
문제 현상
Two blown film lines with the same parameters produce different film thicknesses.
원인 분석
Temperature control deviation makes actual melt temperatures different, with different viscosity and output; During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience; This mechanism has been repeatedly verified by industry literature and should be confirmed first during troubleshooting.
해결 방법
Regularly calibrate thermocouples; replace when deviation exceeds ±3℃; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability; Change only one variable at a time and record parameter changes to facilitate locating effective measures.
핵심 요약
Multi-line consistency relies on unified temperature control metrology; After confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; Incorporate this case into the defect archive as a troubleshooting reference for similar future problems.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!