Molds & Tooling
4 조회수
LDPE Shrinkage 2-5%
문제 현상
Product dimensional deviation is large, shrinkage differs significantly between grades with different densities, and molds are not interchangeable
원인 분석
LDPE has high branching and low crystallinity, with a shrinkage of 2-5%; at density 0.91-0.925g/cm³ the shrinkage is 2-5%, and at density 0.926-0.94 the shrinkage is 1.5-4%; actual shrinkage varies with molding conditions
해결 방법
① Allow mold allowance of 2-5% according to density grade; ② recalculation is mandatory when changing density grades; ③ correct shrinkage after trial molding for precision parts; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
LDPE shrinkage varies in grades with density; mold design must first determine the density grade, so that the allowance has a basis; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!