Extrusion & Post
4 조회수
LDPE Blown Film Thickness Band
문제 현상
The film shows thickness bands at fixed positions, and the roll surface bulges like wood grain after winding
원인 분석
Uneven die heating, air ring blockage, and silicone grease accumulation all cause different melt flow rates at fixed positions to form thickness bands; when the die does not rotate, the thickness band accumulates at fixed positions on the roll surface
해결 방법
① Rotate the die and air ring to distribute the thickness band uniformly; ② clean air ring blockage and grease accumulation; ③ check the integrity of the die heating band; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
Thickness bands rely on rotation for equalization; dispersing fixed defects by motion is a classic solution for blown film winding quality; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!