Extrusion & Post
4 조회수
LDPE Blown Film Wrinkling
문제 현상
The film wrinkles during winding, wrinkling occurs at the collapsing frame, and the roll surface is uneven
원인 분석
Wrinkling originates from the geometric mismatch between the film bubble and the collapsing frame: improper collapsing frame angle, film bubble size fluctuation, uneven nip roller pressure; film surface swing caused by the rotating die also causes wrinkling
해결 방법
① Match the collapsing frame angle with the film bubble size; ② uniform nip roller pressure; ③ reduce rotation speed to reduce film surface swing; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
Blown film wrinkling is a geometric alignment problem; calibrate the collapsing frame, nip roller, and rotation speed in three places; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!