Extrusion & Post
4 조회수
LDPE Blown Film Opening Property
문제 현상
The film is too sticky and difficult to open, and the film layers block and cannot be opened during bag making
원인 분석
The resin contains no antiblock agent or the content is low; melt temperature too high makes fluidity too large; blow-up ratio too large; insufficient cooling causes film layers to stick to each other under nip roller pressure; haul-off speed too fast
해결 방법
① Select grades containing antiblock agent or supplement antiblock masterbatch; ② lower the melt temperature; ③ fully cool before haul-off and winding; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
Opening property is a basic function of the film; the three elements of antiblock agent, temperature, and cooling determine film layer separation; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!