Injection Molding
6 조회수
LDPE '2079851475616104452 Shrinkage Allowance
문제 현상
LDPE injection molded parts have large dimensional deviation, and molds with allowance set for other polyolefins are not applicable
원인 분석
LDPE shrinks 2-5% and varies with density grade; mold allowance must be determined according to the specific grade density; correction after trial molding is more reliable than setting the full allowance at once
해결 방법
① Set mold allowance of 2-5% according to grade density; ② reserve trial mold modification space; ③ test and finalize after dimensions stabilize; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
LDPE mold allowance is a function of density; the trial mold correction route is more practical than theoretical calculation; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!