Injection Molding
6 조회수
LDPE '2079851475616104452 Weld Line
문제 현상
Weld lines are obvious on multi-gate products, and strength at the weld line of thin-walled parts is insufficient
원인 분석
LDPE has good fluidity but the melt fronts join poorly after cooling down; weld lines are more obvious at low mold temperature; parts with high strength requirements should avoid weld lines; when troubleshooting on site, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
① Raise mold temperature to improve joining quality; ② optimize gate position for weld line position; ③ single-gate design when necessary; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
LDPE weld line treatment mainly relies on temperature and position; high-flow materials also need a gate strategy; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!