Material Drying
4 조회수
PA12 Silver Streak Multi-cause Troubleshooting
문제 현상
【Problem phenomenon】PA12 products repeatedly showed silver streaks, which were still not eradicated after strengthening drying
원인 분석
In addition to insufficient drying, silver streaks also stem from excessively high melt temperature, excessively fast injection speed, and material impurities; solely strengthening drying cannot cover all causes; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
First confirm that drying meets the standard, then troubleshoot in sequence: lower barrel temperature and screw speed, lower injection speed and pressure, check material impurities, and appropriately increase back pressure for venting; after adjustment, take consecutive samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
The four causes of silver streaks are drying, temperature, speed, and impurities; when drying is ineffective, check further down; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!