Molds & Tooling
3 조회수
PA66 glass fiber warpage (GF30)
문제 현상
GF-PA66 structural parts warp, cooling adjustment ineffective, highly repeatable.
원인 분석
Fiber orientation shrinkage difference; gate position determines orientation; GF30 is a commonly used reinforced specification with typical orientation warpage; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience.
해결 방법
①Adjust gate position/number to change melt flow direction and convergence position; ②use Moldflow etc. for fiber orientation and warpage analysis; ③balance holding pressure and time, taking into account both feeding and stress; ④verify fiber content and grade; ⑤symmetric structural design, avoid large flat surfaces and asymmetric rib positions.
핵심 요약
GF-PA66 warpage='orientation problem': the gate is the breakthrough point; warpage of reinforced nylon must be treated at the fiber orientation source, hard pressing by cooling is ineffective; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!