Material Drying
4 조회수
PA6 Monofilament Fiber
문제 현상
Monofilament has a high breakage rate during drawing, uneven filament diameter, and strength not reaching the specification
원인 분석
PA6 spinning is extremely sensitive to moisture content, and trace moisture vaporizes at the spinneret holes and breaks the filament; melt temperature fluctuations directly cause filament diameter deviation and strength dispersion; when troubleshooting on site, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
①Deep drying before spinning to moisture content ≤0.08%; ②control melt temperature fluctuation within ±1°C; ③regularly clean the spinneret to prevent blockage by degradation products; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
핵심 요약
Spinning-grade PA6 pushes drying and temperature control requirements to the limit; 0.08% moisture content and ±1°C temperature control are hard indicators for stable spinning; after confirming effectiveness, fix the parameters and practices into the work instructions to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!