Injection Molding
6 조회수
PBAT '2079851475616104452 flash
문제 현상
Flash at the parting line of PBAT '2079851475616104452, due to insufficient clamping force or excessive injection pressure.
원인 분석
PBAT injection pressure demand; insufficient clamping force; mold wear gap; poor parting line fit; injection speed too fast.; when troubleshooting on site, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
①Verify clamping force is sufficient; ②fit the mold parting line; ③optimize injection pressure and speed; ④check mold wear.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
Clamping and mold are the hardware factors of PBAT flash; process optimization is the software adjustment; regular inspection prevents gradual change.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!