Injection Molding
6 조회수
PBT thin-wall product insufficient flowability
문제 현상
Filling is difficult when '2079851475616104452 thin-wall PBT products, with short shot at the end.
원인 분석
PBT melt viscosity is relatively high, and flow resistance is large in thin-wall long flow paths; low temperature or too small gate further restricts flow.; when troubleshooting on site, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
①Appropriately increase melt temperature to improve flow; ②select high-flow PBT grades; ③enlarge gate and runner; ④increase injection speed and pressure.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
Thin-wall PBT filling relies on the coordination of temperature, grade and runner; high-flow grades are the structural solution.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!