Molds & Tooling
3 조회수
PCABS hot runner temperature
문제 현상
【Problem Phenomenon】PC/ABS hot runner gate defects, improper temperature control
원인 분석
Hot runner temperature matches the barrel at 240-260℃; local overheating causes PC degradation, low temperature causes cold material blockage; sufficient preheating at start-up; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based on experience alone
해결 방법
Hot runner 240-260℃ zoned closed-loop; sufficient start-up preheating; regularly check thermocouples; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
PC/ABS hot runner 240-260℃, preheating and temperature control are both important; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems later
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!