Material Drying
4 조회수
PCABS Silver Streaks from Three Gases
문제 현상
PC/ABS silver streaks (water splash and material streaks) are caused by interference from three gases: air, moisture, and cracked gas.
원인 분석
PC/ABS silver streaks are the most common problem; gas interference has three components: air entrained during melt injection, moisture in the material itself, and cracked gas from high-temperature hydrolysis/thermal decomposition; related to mold venting; both drying and process are involved.
해결 방법
①First check that drying is sufficient; ②after confirming drying, adjust the '2079851475616104452 process; ③check mold venting; ④troubleshoot the three types of gases separately; ⑤solve comprehensively.; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
핵심 요약
The three-gas causes of PCABS silver streaks must be systematically investigated; drying is the first priority; venting and process are equally important.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!