Molds & Tooling
3 조회수
PCABS Warpage Cooling
문제 현상
PC/ABS warpage is caused by uneven cooling, managed by mold temperature and cooling cycle.
원인 분석
PC/ABS warpage is caused by uneven cooling; uneven mold temperature; insufficient cooling cycle; deformation direction; temperature difference between front and rear molds; compensation management.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
①Uniform mold temperature; ②sufficient cooling cycle; ③independent temperature control of front and rear molds; ④deformation monitoring; ⑤compensation optimization.; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
핵심 요약
Cooling uniformity is the core of PCABS warpage; independent temperature control and compensation; monitoring ensures the effect.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!