Molds & Tooling
3 조회수
PCABS Short Shot Material Shortage
문제 현상
[Problem Phenomenon] PC/ABS thin-wall long-flow-path ends are short of material, and temperature adjustment has limited effect
원인 분석
Melt front freezing, poor venting, and too small gate; although PC/ABS has good flow, thin walls and long flows are still limited; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
Raise melt temperature and mold temperature to the upper limit of the window; strengthen venting; enlarge the gate; change to multiple gates if the flow length is too large; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
핵심 요약
For PC/ABS short shot, troubleshoot in the order of temperature, venting, and gate; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!