Molds & Tooling
3 조회수
PCABS Mold Sticking and Scratching
문제 현상
[Problem Phenomenon] PC/ABS products stick to the mold and are scratched, deforming during demolding
원인 분석
Excessive holding pressure causes high internal stress, insufficient draft angle, and improper cavity polishing; the PC phase has strong rigidity and gripping force; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
Reduce holding pressure; check draft angle and polishing; balanced ejection; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
핵심 요약
For PC/ABS mold sticking, first reduce holding pressure, then draft angle and polishing; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!