Extrusion & Post
11 조회수
PCL low melt strength stringing
문제 현상
PCL has low melt strength during extrusion or printing, severe stringing, and poor surface finish.
원인 분석
PCL has low melt strength; stringing is prone to occur during high-speed extrusion; the melt stays in the nozzle too long and thermally degrades; bubbles and impurities are generated; printing accuracy decreases.
해결 방법
①Extrusion or printing speed control; ②Nozzle temperature management; ③Shortening of melt residence time; ④Retraction or wiping mechanism; ⑤'2079851475616104451.；After adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
PCL stringing is a direct manifestation of low melt strength; speed and temperature management; mechanism assistance improves the surface.；After confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!