Processing Machinery
6 조회수
PC screw rotation speed and back pressure
문제 현상
【Problem Phenomenon】PC screw runs at high speed and high back pressure, plasticization shear is excessive causing degradation
원인 분석
PC screw rotation speed should be medium-low, back pressure 5-15MPa; high rotation speed and high back pressure shear heat degrades PC; plasticization relies mainly on external heat；During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience
해결 방법
Screw at medium-low speed; back pressure 5-15MPa; if plasticization is insufficient, raise external heat instead of adding shear；After adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability；Change only one variable at a time and record parameter changes to facilitate locating effective measures
핵심 요약
PC screw at medium-low speed and low back pressure, external heat as the main and shear as the auxiliary；After confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence；Include this case in the defect archive as a reference for troubleshooting similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!