Material Drying
4 조회수
PC first article verification process
문제 현상
After mold and material changeover, silver streaks and cracking appear in batches, and tracing finds first article verification was a mere formality
원인 분석
PC is sensitive to parameters; after mold and material changeover, changes in drying, temperature, and pressure states are mass-produced without sufficient verification, and hidden deviations are amplified into batch accidents in the batch；During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience
해결 방법
①First article performs four verifications: moisture content, appearance, polarized light stress, and impact; ②Mass production only after parameters are locked; ③Melt index and color comparison for grade change；After adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
PC first article verification must include material state indicators; four verifications plus parameter locking are the institutional guarantee to keep accidents before mass production；After confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!