Injection Molding
6 조회수
PC Flash and Overflow
문제 현상
[Problem Phenomenon] PC parting line flash, high trimming cost
원인 분석
Excessive injection pressure, insufficient clamping and parting line wear; PC's high pressure demand tests the clamping; when troubleshooting on site, verify each item according to this mechanism one by one, and avoid blindly adjusting the machine based on experience alone
해결 방법
Reduce the injection pressure and holding pressure; verify the clamping force; repair the parting line; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes, so as to locate effective measures
핵심 요약
For PC flash, first reduce the pressure, then check the clamping and parting line; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!