Molds & Tooling
3 조회수
PC Mold Sticking and Scratching
문제 현상
[Problem Phenomenon] PC products stick to the mold, get scratched and are difficult to demold
원인 분석
Excessive holding pressure and large internal stress, insufficient draft angle, improper polishing; PC has strong rigid gripping force; when troubleshooting on site, verify each item according to this mechanism one by one, and avoid blindly adjusting the machine based on experience alone
해결 방법
Reduce the holding pressure; check the draft angle and polishing; balanced ejection; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes, so as to locate effective measures
핵심 요약
For PC mold sticking, first reduce the holding pressure, then the draft angle and polishing; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!