Molds & Tooling
3 조회수
PC Glass Fiber Warpage
문제 현상
[Problem Phenomenon] Glass fiber PC warpage is harder to control than ordinary PC
원인 분석
Fiber orientation causes shrinkage anisotropy; the gate position determines the orientation distribution; uneven cooling superimposes; when troubleshooting on site, verify each item according to this mechanism one by one, and avoid blindly adjusting the machine based on experience alone
해결 방법
Optimize the gate to homogenize the fiber orientation; uniform mold temperature; low-warpage grades; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes, so as to locate effective measures
핵심 요약
The root of PC glass fiber warpage is orientation, and the gate is the key; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!