Extrusion & Post
4 조회수
PC FDM Weak Interlayer
문제 현상
[Problem Phenomenon] PC printed parts delaminate between layers and deform
원인 분석
Low extrusion temperature and cold chamber cause insufficient interlayer fusion; PC printing is difficult; when troubleshooting on site, verify each item according to this mechanism one by one, and avoid blindly adjusting the machine based on experience alone; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
해결 방법
Increase the nozzle temperature; high-temperature enclosed chamber; bed temperature 100-120°C; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes, so as to locate effective measures
핵심 요약
PC printing weak interlayer relies on the high-temperature chamber; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!