Processing Machinery
6 조회수
PE Pipe Surface Roughness and Black Specks
문제 현상
The outer surface of PE pipes is rough and dull, or black specks and impurities appear on the surface/inside; drinking water pipes and gas pipes are directly rejected.
원인 분석
Surface roughness is mostly caused by low melt temperature and poor plasticization, poor raw material quality or high regrind ratio, and screw and die contamination and wear; black specks come from raw material contamination or carbonized material shedding from the barrel and die head, and non-standard startup and shutdown procedures cause the material to be heated for a long time and carbonized.
해결 방법
①Optimize the temperature settings to ensure full plasticization; ②use qualified PE resin and control the regrind ratio; ③regularly clean the screw, barrel and die; ④standardize the startup and shutdown procedures, emptying or lowering the temperature before shutdown; ⑤check the screen pack condition and strengthen raw material cleanliness management.
핵심 요약
Troubleshoot PE pipe appearance in the order of 'plasticization → raw material → cleanliness': for roughness look at plasticization and raw material, for black specks look at carbonization and contamination; drinking water/gas pipes have zero tolerance for black specks, and shutdown management must become an iron rule.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!