Extrusion & Post
4 조회수
PE Blown Film Bubble Instability
문제 현상
LDPE/LLDPE/HDPE blown film bubbles sway left and right, shake and even break, with thickness and lay-flat width fluctuations, making normal production impossible.
원인 분석
Extrusion output fluctuations (unstable feeding, screw wear, screen pack blockage), uneven air ring cooling and environmental airflow disturbances all make the bubble unstable; LLDPE has low melt strength and inherently poor bubble stability, more susceptible to disturbances.
해결 방법
①Stabilize the feeding and extrusion output, and check the screw wear and screen pack pressure differential; ②supply air uniformly from the air ring and calibrate the air volume distribution; ③shield the workshop airflow; ④LLDPE can be blended with LDPE to increase the melt strength; ⑤stabilize the melt temperature and haul-off.
핵심 요약
Bubble stability = 'stable extrusion + uniform air ring + still airflow': first suppress the extrusion fluctuations, then even out the air ring, and finally manage the environment; when the LLDPE bubble is unstable, blending to increase the melt strength often works immediately.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!