Extrusion & Post
4 조회수
PE Film Wrinkles and Poor Winding
문제 현상
Oblique or longitudinal wrinkles appear on the film surface, the roll tightness is uneven, the end face is star/chrysanthemum-shaped, and the edge wandering is conical.
원인 분석
Wrinkles are mostly caused by poor bubble centering, improper collapsing board angle and uneven nip roller pressure; roll problems mostly originate from thickness deviation accumulation, improper tension taper settings, uneven contact pressure or poor paper core quality.
해결 방법
①Center the bubble and adjust the collapsing boards and flattening rollers; ②even the nip roller pressure; ③solve the thickness deviation before talking about winding; ④optimize the tension taper curve and contact roller pressure; ⑤check the correction system and paper core quality.
핵심 요약
Eighty percent of PE film winding problems come from the film's own thickness unevenness: first get the thickness deviation and centering right, then adjust the tension taper; talking about winding on a film with uneven thickness will never wind well.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!