Injection Molding
6 조회수
Warpage of HDPE '2079851475616104452 (Orientation Type)
문제 현상
HDPE injection molded parts warp in a fixed direction; adjusting cooling unevenness yields little effect, and it recurs even though it is unrelated to fiber orientation.
원인 분석
HDPE has high crystallinity and strong shrinkage directionality; molecular chains orient along the flow direction, making the flow/transverse shrinkage difference obvious; the gate position determines the orientation pattern, so the warpage direction is stable and highly repeatable.
해결 방법
①Adjust the gate position to change the material flow direction and orientation; ②Use CAE to analyze filling and orientation; ③Balance holding pressure and cooling; ④Optimize wall thickness and structural symmetry; ⑤Switch to a low-warpage grade if necessary.
핵심 요약
HDPE orientation-type warpage must be solved through gate and orientation analysis, rather than forcibly suppressing it with cooling; once the warpage direction of a highly crystalline material is fixed, it is time to go back and review the gate design.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!