Molds & Tooling
3 조회수
PEEK Burning and Trapped Air Black Spots
문제 현상
【Problem Phenomenon】Burnt black spots appear at the ends and rib positions of PEEK products, accompanied by a pungent odor
원인 분석
Air trapped in the cavity is adiabatically compressed under high pressure and heats up, burning the melt; the PEEK processing temperature is already close to the material limit, so the temperature rise of trapped air more easily breaks through the degradation threshold; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
Strengthen venting at ends and rib positions and control the depth at 0.02-0.025mm; reduce the injection speed in the final stage; adjust the gate in the trapped air area to change the confluence position
핵심 요약
For high-temperature materials, trapped air means burning; venting and final-stage speed reduction are double insurance; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!