Molds & Tooling
3 조회수
PEEK Stress Whitening and Ejection
문제 현상
【Problem Phenomenon】The ejection area of PEEK products turns white, and areas with excessive holding pressure darken in color
원인 분석
Excessive holding pressure or poor ejection design causes local stress concentration; stress whitening is the optical manifestation of molecular chains being oriented under force; when the ejector pins are unevenly arranged, the stress in the ejection area exceeds the limit
해결 방법
Optimize the holding pressure curve to avoid over-packing; increase the number of ejector pins to balance the ejection force; check the draft angle and ejector pin layout in the whitened area; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
핵심 요약
Stress whitening points to over-packing and uneven ejection; reduce pressure first, then balance ejection; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!