Molds & Tooling
3 조회수
PEEK Compression Molding Demolding Difficulty
문제 현상
【Problem Phenomenon】PEEK compression molded parts stick to the mold and are difficult to demold, with surface scratches
원인 분석
PEEK's adhesion to the mold and shrinkage gripping make the demolding force large; Victrex recommends blending 2-3% PTFE lubricant-grade powder to improve demolding; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
Blend 2-3% PTFE lubricant powder into the material to aid demolding; polish the mold cavity and apply high-temperature release agent; optimize demolding temperature and tooling design; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
핵심 요약
Compression molding demolding relies on the dual means of PTFE internal lubrication plus mold surface treatment; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!