Extrusion & Post
11 조회수
PEEK Printing Platform Adhesion and Warpage
문제 현상
【Problem Phenomenon】PEEK printed parts have poor first-layer adhesion, and corners warp and detach from the platform
원인 분석
PEEK is semi-crystalline with large shrinkage; a cold platform has insufficient adhesion and uneven cooling causes warpage; a bed temperature of about 100℃ combined with a special fixing agent can improve adhesion; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
Heat the platform to 100℃ and use special adhesives such as DimaFix; enclose the chamber to reduce ambient temperature difference; slow down and thicken the first layer and optimize the model placement orientation
핵심 요약
Printing adhesion relies on a heated bed plus a special agent; chamber insulation simultaneously prevents warpage; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!