Material Drying
3 조회수
PET injection-grade drying 0.02%
문제 현상
PET engineering injection molded parts discolor and become brittle, strength tests fail, and the products carry color
원인 분석
PET molecules contain ester groups and are hydrophilic; when the moisture content exceeds the limit, hydrolysis occurs during '2079851475616104452, molecular weight decreases, and products discolor and become brittle; the moisture red line for injection grade is 0.02%, looser than for sheet but still requiring strict management
해결 방법
①Dehumidify and dry to moisture <0.02%; ②150℃ × more than 4 hours or 170℃ × 3-4 hours; ③air-shot method inspection: if the shot material strand is smooth and free of bubbles, the drying is qualified
핵심 요약
PET injection-grade drying can be quickly checked on site with the air-shot method; the 0.02% red line plus air-shot verification is a practical standard executable in the workshop; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!