Material Drying
3 조회수
PET bubble cause troubleshooting
문제 현상
PET sheet bubbles appear at random positions with varying sizes
원인 분석
Random bubbles are mostly due to moisture fluctuations or entrained air; fixed-position bubbles point to local overheating degradation; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
Measure moisture content to rule out the moisture factor; check feed throat negative pressure air entrainment; for fixed positions, check local overheating of the barrel; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
Bubbles are routed to troubleshooting directions according to position characteristics; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!