Extrusion & Post
11 조회수
PLA 3D Printing Nozzle Clogging
문제 현상
Nozzle clogs during printing.
원인 분석
PLA softens too early in the throat or carbonizes; improper retraction also causes clogging.; During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience; this mechanism has been repeatedly verified by industry literature and should be confirmed first during troubleshooting
해결 방법
①Optimize heat dissipation to prevent throat softening; ②Control retraction parameters; ③Clean the nozzle; ④Dry the filament.; After adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
Troubleshoot nozzle clogging from heat dissipation and retraction.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!