Injection Molding
11 조회수
PLA '2079851475616104452 Cycle Management
문제 현상
Cooling time is shortened to increase output, and PLA products have insufficient crystallization and fluctuating performance
원인 분석
PLA crystallizes slowly, and insufficient cooling time causes insufficient crystallization; the modulus increases but strength and toughness fluctuate; the balance of cycle and crystallinity needs to be set according to product requirements; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience
해결 방법
①Cooling time set according to crystallization requirements; ②Appropriately extend cooling for high-performance parts to promote crystallization; ③Use nucleating agents to shorten crystallization time and maintain the cycle; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
The variable of PLA cycle management is crystallinity; nucleating agents are the reconciling means for maintaining both cycle and performance; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!