Material Drying
3 조회수
PLA First Article Verification
문제 현상
After material or mold changeover, batches show embrittlement and performance fluctuations, and the first article is only checked for appearance
원인 분석
PLA is sensitive to moisture, temperature and residence, and molecular weight and crystallization behavior change after a grade change; the first article does not undergo melt index and mechanical verification, and batch risk is out of control; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience
해결 방법
①The first article performs three verifications: appearance, dimensions, melt index or mechanical; ②Compare crystallization and shrinkage after a grade change; ③Mass production after parameter locking; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
PLA first article verification must include the material state; the melt index is the rapid quantitative indicator of degradation degree; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!