Molds & Tooling
3 조회수
PMMA Multi-Cavity Transparency Inconsistency
문제 현상
Products from each cavity of a multi-cavity mold have inconsistent transparency and stress levels.
원인 분석
Imbalanced runners and cooling among cavities cause different filling shear and cooling rates; hot runner temperature differences also change the melt state of each cavity.; During on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based on experience alone.
해결 방법
①Balance runners and cooling; ②calibrate hot runner temperatures at each point; ③test optical indicators cavity by cavity; ④optimize process by cavity position.; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability.
핵심 요약
The balance requirement of optical multi-cavity molds is higher than for ordinary parts; cavity-by-cavity optical testing is a direct means to verify balance.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!