Processing Machinery
3 조회수
PMMA Back Pressure Control
문제 현상
Products turn yellow after the PMMA melt back pressure is too high
원인 분석
High back pressure generates heat by shear, raising the actual melt temperature and causing PMMA thermal degradation; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry literature and should be confirmed first during troubleshooting
해결 방법
Control back pressure at 0.3-0.7MPa; when yellowing occurs, first check back pressure and screw speed; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability
핵심 요약
PMMA back pressure should be low; shear heat is a hidden temperature rise; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!