Molding Process
12 조회수
PMMA Drilling Technology
문제 현상
During drilling, the sheet edges chip and crack, hole walls are rough, and threaded connections crack
원인 분석
Improper drill bit angle and overly fast feed cause hole edge chipping; the drill bit angle should be 60-90°; thin sheets can be scored and snapped instead of drilled; hole edge stress concentration is the root cause of thread cracking
해결 방법
①Drill bit angle 60-90° with sufficient cooling; ②low-speed feed to prevent edge chipping; ③enlarge the pilot hole of threaded holes and avoid direct tapping stress; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability
핵심 요약
PMMA drilling relies on angle and cooling; a 60-90° drill bit plus low-speed feed are the basic parameters to prevent edge chipping; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!