Molds & Tooling
3 조회수
PMMA Demolding Whitening
문제 현상
PMMA products whiten at ejection locations during demolding
원인 분석
Ejection stress causes local crazing, and whitening is obvious in transparent parts; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry literature and should be confirmed first during troubleshooting
해결 방법
Enlarge and add ejector pins; sufficient draft angle; appropriately raise mold temperature; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
핵심 요약
Demolding whitening is solved by ejection equalization; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!