Processing Machinery
3 조회수
POM glass fiber reinforced aggravated warpage
문제 현상
Glass fiber reinforced POM products warp more severely than pure resin with obvious directionality, and the warpage direction is consistent with the glass fiber orientation.
원인 분석
Glass fibers orient along the flow direction, with small shrinkage in the orientation direction and large shrinkage in the perpendicular direction, and anisotropic shrinkage causes warpage; the higher the fiber content, the stronger the directionality.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
①Optimize the gate position to balance fiber orientation; ②increase mold temperature to reduce temperature differences; ③adjust the holding pressure curve; ④evaluate switching to a low-warpage grade.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
The core of reinforced POM warpage is fiber orientation anisotropy; gate design and mold temperature are the main means, and severe cases need to be solved at the material level.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!