Molds & Tooling
4 조회수
POM winter compensation
문제 현상
POM product dimensions are overall smaller in winter
원인 분석
Low workshop temperature makes the mold dissipate heat quickly, the actual mold temperature is lower than the set value, and the crystallization shrinkage pattern changes; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
Raise the mold temperature by 5-10°C in winter and measure it; take the upper limit for material temperature; insulate the workshop; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
핵심 요약
Seasonal temperature differences must be compensated by actual measurement, not just by looking at the settings; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!