Processing Machinery
3 조회수
POM screw compression ratio
문제 현상
POM plasticization is poor and the melt temperature is uneven
원인 분석
The screw compression ratio does not match POM's melting characteristics, and the shear heat distribution is unreasonable; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
Select a screw with a compression ratio of 2.0-2.5 for POM; L/D ratio 18-22; replace worn screws in time; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
Screw selection must match POM's melting characteristics; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!