Processing Machinery
3 조회수
POM melt temperature too low
문제 현상
The POM melt temperature was set at 180°C, and the products have cold slugs and low strength
원인 분석
Below the temperature for sufficient melting, plasticization is poor and melt uniformity is bad; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
해결 방법
Raise the melt temperature above 190°C; check the heater band condition; enlarge the cold slug well; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
핵심 요약
The temperature lower limit ensures plasticization quality, and the temperature must not be lowered excessively to prevent degradation; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!