Injection Molding
4 조회수
PP '2079851475616104452 Warpage Deformation
문제 현상
After ejection, PP parts twist and bow, flat parts warp at edges, making assembly difficult.
원인 분석
PP is a semi-crystalline material with shrinkage as high as 1.5%~2.5% and strong directionality; differential shrinkage caused by uneven cooling, wall thickness differences, and molecular orientation all cause warpage.
해결 방법
①Separate circuit temperature control for core/cavity with temperature difference <5℃; ②appropriately raise mold temperature (e.g., 40℃→55℃) for more uniform and sufficient cooling; ③reduce holding pressure by 15%~25% to reduce frozen stress; ④extend cooling time by 20%~30%; ⑤optimize wall thickness uniformity.
핵심 요약
PP warpage takes 'uniform cooling + sufficient crystallization' as the main direction of attack.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!