Injection Molding
4 조회수
PP '2079851475616104452 Cold Slug Mark
문제 현상
Misty, pock-like small spots appear near the gate, inconsistent with the matrix in gloss and color, reappearing in the next shot after removal.
원인 분석
Cold material at the nozzle or runner front is carried into the cavity in the next shot and fails to fuse with new melt, leaving traces; too small cold slug wells, low nozzle temperature, and excessive nozzle-mold contact time all cause repeated cold slug formation.
해결 방법
①Enlarge or add cold slug wells at key positions to 'catch' the cold front material; ②appropriately raise nozzle temperature; ③check whether nozzle heater bands and thermocouples are normal; ④shorten nozzle-mold contact time; ⑤optimize gate position to reduce cold material entering the cavity.
핵심 요약
The antidote for PP cold slug marks is 'cold slug well + nozzle temperature': first guide cold material into the cold slug well, then ensure nozzle temperature is not low; recurring fixed-position small spots are mostly due to inadequate cold slug well design.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!