Processing Machinery
3 조회수
PPO Shot Size and Barrel Capacity
문제 현상
【Problem Phenomenon】Processing PPO with a small machine at full shot or a large machine at small shot, product quality is unstable
원인 분석
The NHP9023 data sheet requires shot size to be 30-70% of barrel capacity; too low means long residence time and high degradation risk, too high means insufficient plasticization; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience
해결 방법
Match the machine with shot size at 30-70% of barrel capacity; change machine size if out of range; calculate residence time to verify thermal safety; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
핵심 요약
PPO shot size 30-70% is the machine matching benchmark; both ends produce quality problems; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!