Injection Molding
4 조회수
PPO Injection Pressure As Low As Possible
문제 현상
【Problem Phenomenon】PPO products have large internal stress and demolding deformation, and traceability finds the pressure setting is too high
원인 분석
The SABIC process parameter table clearly states that injection pressure is recommended as low as possible; the lowest pressure that satisfies filling reduces internal stress and flash
해결 방법
Gradually lower injection pressure to find the lower limit while ensuring filling; coordinate with mold temperature and melt temperature to compensate flow; perform stress testing on internal stress sensitive parts; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
핵심 요약
PPO injection pressure as low as possible; flow problems are compensated with temperature rather than piled up with pressure; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!