Material Drying
3 조회수
PPO Silver Streaks and Moisture
문제 현상
[Problem Phenomenon] Silvery-white filamentary streaks on the surface of PPO products, uneven gloss, appearing in batches
원인 분석
Although PPO's water absorption is low, trace moisture forms silver streaks and a non-smooth phenomenon on the surface; insufficient drying, hopper moisture regain or wet regrind are the three major sources; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
Fully dry to 0.02% moisture content and verify; check hopper sealing and regrind drying; redry the silver-streaked material and verify in a small batch; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
Ninety percent of PPO silver streaks are moisture; drying verification plus hopper management work with two prongs; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!